Subscribe to
Posts
Comments
Subscribe with Bloglines

14 Sept 07

Exigent Gun Maintenance:

There are many commercially-available solvents, lubricants, and devices made specifically for firearms maintenance, and all work well. However, in a crisis, none of that stuff is likely to be available. What is universally available is (1) hot, soapy water, (2) diesel fuel, (3) transmission fluid, (4) old T-shirts, (5) a toothbrush. Those five items can be used to adequately clean and lubricate nearly any gun, and you’ll seldom find yourself in a place where they are not readily at hand.

After soaking for a few minutes in hot, soapy water, nearly all hardened deposits of crud on gun parts will soften and can then be easily removed with a toothbrush. After a subsequent hot-water rinse, excess moisture will self-evaporate. A light coat of diesel fuel can then be applied to prevent steel parts from rusting. Chamber and bore are particularly susceptible to rust and must be continuously coated with oil.

On any car or truck, both transmission housing and crankcase have dipsticks. Remove the dipstick from the transmission. On the tip will be several drops of transmission fluid, one of the best lubricants in existence! Half-dozen drops of transmission fluid is all that is necessary to adequately lubricate most guns. All moving parts that rub against other parts should be lubricated. On large-caliber pistols, dipsticks can be used to drag an oily T-shirt remnant through the bore.

These is little reason, and even less excuse, to be packing poorly-maintained guns. In exigent circumstances, we may have to get creative, but sensible gun maintenance at the user level is always possible and ever necessary!

/John

Visit John’s Site

One Response to “John Farnam on Exigent Gun Maintenance”

  1. on 15 Sep 2007 at 9:02 amAffe

    I remember reading that Mobil One is among the best firearms lubricants around - more here:

    http://guntards.net/forum/viewtopic.php?id=304

Leave a Reply